• Comes with universal round and with standart '55x55 frames' compatible cover
• Battery powered (CR2450 battery included)
• Optionally mains powered (230 VAC)
• Long battery life, up to 5 years (TYP)
• Degree of protection IP20
• Operating temperature 0° - 40 °C

• Device detection options: Light conditions, Switch-off delay time, and Detection sensitivity
• Ø6 m detection area when ceiling mounted at 2.5 m 
• Multi-color LED for low battery and connection health indication
• xComfort RF compatible (RF 868.3 MHz)

There are 4 different mounting methods:

• Ceiling-recessed in a flush-box. Using the round front cover plate
• Surface-mounted, screwed. Using the round cover plate + the surface mount adapter
• Surface-mounted, glued with adhesive tape. Using the round cover plate + the surface mount adapter
• Recessed in a flush-box in combination with a universal 55x55 mm WA frame. Using the 55x55 mm cover plate

Energy saving

Following a defined period of time after a room has been vacated, the xComfort Universal Motion triggers the controller to set the heating to economy and later to standby. Heating is switched back to comfort upon reentering the room.

Peace of mind

Following a definable switch-off delay, the room lights are automatically switched off (or dimmed to a certain level). The lights are switched on again upon entering the room. As a consequence, they are never left unnecessarily on.

Increased safety

Upon detection, the “away” mode scares off unwanted visitors by triggering the xComfort controller to switch on all the lights and to open all the blinds. A corresponding alert is automatically submitted by the xComfort controller.                           

The xComfort Universal Motion Sensor is an easy to install wireless solution. It uses movement detection for the activation of future-proof smart home functions.