Software tools and configurators | Service & Support | Eaton

The convenient SL7/SL4 signal towers configurator allows you to assemble the signal tower you need with just a few clicks. You can simulate light and sound functions online for a direct review of whether the right modules have been selected. The tool then generates an order list for you to forward directly to Eaton or the wholesaler of your choice.

No matter whether you want to configure your motor starter as DOL, reversing or star delta, whether you need a fuse-based or fuseless installation, or whether you prefer an electromechanical motor starter or an electronic motor starter: This configurator helps you pick the right solution in just a few clicks. Linked to the online catalogue, it provides a convenient way to create complete order lists and wiring sets. Once finished, you can then send the finished list to your sales partner.

Calculating the temperature rise within the switchgear and controlgear assembly: Calculate power loss of all circuits including the internal conductor on the basis of the rated current. Power loss of the switchgear and controlgear assembly is calculated by adding up the power losses of the circuit. Power loss of conductors is determined by calculation. Determining the temperature rise characteristic curve within the switchgear and control-gear assembly: From the entire power loss using the procedure mentioned in IEC 60890. The Temperature Calculator supports you in the creation of temperature rise verifications in accordance with the IEC 61439-1 standard.