Download document () of 20
Power supplies

Wheelock PS power supplies

The Wheelock POWERPATH Power Supply (PS-8-LP) is a supervised remote power supply/battery charger in a low profile cabinet that is used for supervision and expanded power driving capability of fire alarm Notification Appliance Circuits (NACs). The PS-8-LP is filtered and regulated and provides 8 amps of power distributed across 4 outputs.

The PS-8-LP features 2 Class B or 2 Class A inputs, input to output follow mode and audible silence capability, dip switch programming and LED latching option, 2 Relays - AC fail and common trouble , and programmable AC loss relay delay. It also provides POWERPATH to POWERPATH panel synchronization and 2.5 amp auxiliary power w/ reset capability.

NAC Power
8 amps 4 Class B NACs or 2 Class A
Optional Expansion
8 Class B or 4 Class A (same box)

Lowest equipment cost per NAC

With up to 8 NACs at 1 amp each, PS-8-LP supports up to 264 Exceder LED3 devices, fully synchronized.

Best ground fault detection

Ground fault detection of each of 8 NACs, each relay, auxiliary output circuit, and synchronization bus power

Best diagnostics

  • Up to 37 distinguishable diagnostic codes available
  • Open, short and over current indications for each of the 8 NACs
  • Auxiliary power with 2 modes of operation: Constant power - 250 mA; Managed power - 2.5 A
  • AC power on, AC loss trouble, battery power on, battery trouble
  • Internal diagnostics: Microprocessor, battery charger, logic board power, synchronization bus power
Approvals
UL 864, UL 1481, FM
Specifications
Highlight differences
Show only differences
Hide blank features
Download Links

Need product support?

Support from Eaton

Contact Us

Eaton

Life safety & mass notification solutions

273 Branchport Avenue

Long Branch, NJ 07740

P:  (800) 631-2148

F:  (732) 222-8750