120V 500VA 260W Standby UPS, 8 Outlets (NEMA 5-15R), 5-15P Plug, 5 ft. (1.52 m) Cord, Desktop/Wall Mount - Not for sale in California until further notice.
Product Name |
Eaton Tripp Lite series UPS
|
Catalog Number |
BC500
|
UPC |
037332237880
|
Product Length/Depth |
10.86 in
|
Product Height |
7.36 in
|
Product Width |
5.67 in
|
Product Weight |
3.96 lb
|
Compliances |
RoHS
FCC Class B |
Certifications |
NOM
UL 1778 CSA certified |
Global Catalog |
BC500
|
Topology |
Standby
|
Form factor |
Desktop
|
Package contents |
|
Input nominal voltage |
110 VAC/115 VAC/120 VAC
|
Nominal frequency |
50/60 Hz
|
Input frequency range |
50/60 Hz
|
Receptacle |
5-15R
|
Output nominal voltage |
110 / 120V
|
Electric current - max |
|
Runtime at half load |
6.9 min
|
Relative humidity |
0-90% non-condensing
|
Output Receptacles |
5-15R
|
Product Highlights |
Protects equipment against blackouts, brownouts, overvoltages, surges and line noise
Battery backup allows time to save files and safely shut down during blackouts Front-panel LED indicates line/battery mode and low-battery statuses at a glance 8 NEMA 5-15R outlets provide power to PC, home theater or networking equipment High >98% efficiency reduces BTU emissions, saves power and lowers energy costs High >98% efficiency reduces BTU emissions, saves power and lowers energy costs |
Nominal Output Voltage |
110V
115V 120V |
Network Management Cards Details |
Network management not supported
|
Phase (input) |
Single-phase
|
Runtime at full load |
1.5 min. (260W)
|
Communication interface |
None
|
Battery Access |
Battery access door
|
Dc Voltage |
12
|
Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
Input Circuit Breakers |
7A
|
High Voltage Transfer to Battery Power |
145V
|
Low Voltage Transfer to Battery Power |
95V
|
Application |
|
Switch configuration |
Power switch enables UPS on / off control
|
Hot Swap PDU Options |
PDUB15 (2U / 8 5-15R outlets)
|
AC suppression joule rating |
316
|
Housing material |
ABS
|
Output AC waveform (AC mode) |
Sine wave
|
Output AC waveform (battery mode) |
PWM sine wave
|
Output Capacity (kVA) |
.5
|
Output Capacity (kW) |
.26
|
Output Capacity (VA) |
500
|
Output Capacity (Watts) |
260
|
Primary UPS Depth (mm) |
185
|
Primary UPS Height (mm) |
105
|
Primary UPS Width (mm) |
110
|
AC Suppression Response Time |
Instantaneous
|
Audible Alarms |
Alarm reports low-battery, fault, overload and replace battery conditions
|
Battery Start Capability |
Cold-start operation supported
|
Battery Replacement Description |
Replaceable internal batteries (see manual)
|
LED Indicators |
Status LED reports off / on power status and battery mode operation
|
Output Voltage Regulation(Battery Mode) |
120V ±10%
|
Rechargeable Battery |
6.5 hours from 10% to 90%
|
Recommended Electrical Service |
15A 120V
|
Storage Temperature |
5° to 113°F (-15° to 45°C )
|
Nominal Voltage Details |
120v nominal output in battery mode
|
Maximum Input Amps |
10
|
UPS Input Cord Length (m) |
1.5
|
UPS Power Module Dimensions |
4.13 x 4.33 x 7.28
|
Power Mode Transfer Time |
6 milliseconds (typical) / 10 milliseconds (max)
|
Connected Equipment Insurance |
$100,000 Ultimate Lifetime Insurance
|
EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
UPS Input Connection Type |
5-15P
|
Green Energy-Saving Features |
Greater than 95% efficiency - GREEN UPS
|
UPS Output Receptacles |
4 UPS outlets, 4 surge-only outlets
|
High Availability UPS Features |
Surge/noise protection
|